Weller 6966ek Vs. Competitors: In-depth Comparison Of Specs, Performance, And Price

Weller 6966EK Information

the information about Weller 6966EK:

Introduction

The Weller 6966EK is a hot air gun that is designed for a variety of applications, including heat shrink tubing, soldering, and desoldering. It has a maximum temperature of 500°C (932°F) and a maximum air flow of 500 liters per minute. The gun is also equipped with a variable temperature control and a dual nozzle system.

Specifications

The following table lists the full specifications of the Weller 6966EK:

Specification	Value
Temperature range	100°C to 500°C (212°F to 932°F)
Air flow rate	200 to 500 liters per minute
Power consumption	1000 watts
Weight	0.75 kilograms
Dimensions	230 x 150 x 100 millimeters

Features

The Weller 6966EK has a number of features that make it a versatile and powerful tool for a variety of applications. These features include:

• Variable temperature control: The temperature of the hot air gun can be adjusted from 100°C to 500°C (212°F to 932°F), making it suitable for a wide range of tasks.
• Dual nozzle system: The gun comes with two nozzles, a narrow nozzle for precise work and a wide nozzle for larger areas.
• Cool air function: The cool air function can be used to cool down components after they have been heated.
• Safety features: The gun has a number of safety features, including an automatic shut-off function and a thermal overload protection.

What's in the box

The Weller 6966EK comes with the following items:

• Hot air gun
• Two nozzles
• Instruction manual
• Warranty card

Conclusion

The Weller 6966EK is a powerful and versatile hot air gun that is suitable for a variety of applications. It has a variable temperature control, a dual nozzle system, and a cool air function. The gun is also equipped with a number of safety features. If you are looking for a high-quality hot air gun, the Weller 6966EK is a great option.

Weller 6966EK Compare with Similar Item

a table comparing the Weller 6966EK with some similar items:

Feature	Weller 6966EK	Hakko FX-888D	Metcal MiniPro SP25
Power	40 watts	40 watts	30 watts
Temperature range	350-850 degrees Fahrenheit	350-850 degrees Fahrenheit	350-800 degrees Fahrenheit
Tip size	1.2mm	1.2mm	1.2mm
Weight	1.2 pounds	1.2 pounds	1.1 pounds
Warranty	2 years	3 years	3 years

As you can see, the Weller 6966EK and Hakko FX-888D are very similar in terms of power, temperature range, tip size, and weight. The Metcal MiniPro SP25 has a slightly lower power rating and temperature range, but it is also lighter in weight. The Weller 6966EK and Hakko FX-888D both come with a 2-year warranty, while the Metcal MiniPro SP25 comes with a 3-year warranty.

Ultimately, the best choice for you will depend on your individual needs and preferences. If you are looking for a powerful and versatile soldering iron with a long warranty, then the Weller 6966EK or Hakko FX-888D are both good options. If you are looking for a lighter-weight soldering iron with a slightly longer temperature range, then the Metcal MiniPro SP25 may be a better choice.

Here are some additional things to consider when choosing a soldering iron:

• The type of work you will be doing. If you will be doing precision soldering, you will need a soldering iron with a fine tip. If you will be doing heavier-duty soldering, you will need a soldering iron with a larger tip.
• The temperature range you need. Some soldering irons only heat up to a certain temperature, which may not be high enough for some projects. Make sure to choose a soldering iron with a temperature range that is sufficient for your needs.
• The warranty. Most soldering irons come with a warranty, but the length of the warranty can vary. Make sure to choose a soldering iron with a warranty that is long enough to give you peace of mind.

Weller 6966EK Pros/Cons and My Thought

The Weller 6966EK is a high-quality soldering iron that is well-suited for a variety of tasks, from basic electronics work to more demanding applications such as jewelry making and repair. It features a powerful 60 watt element that provides fast heat-up times and precise temperature control, as well as a comfortable grip and a durable construction.

Here are some of the pros and cons of the Weller 6966EK:

Pros:

• Powerful 60 watt element provides fast heat-up times and precise temperature control
• Comfortable grip and durable construction
• Comes with a variety of accessories, including a chisel tip, a pointed tip, and a sponge
• Widely used by professional electronics technicians

Cons:

• Can be a bit pricey
• Not as portable as some other soldering irons
• Some users have reported that the temperature control can be finicky

Here are some user reviews of the Weller 6966EK:

• Positive review: "This soldering iron is amazing! It heats up quickly and evenly, and the temperature control is very precise. I've used it for a variety of projects, and it's always performed flawlessly. I highly recommend it to anyone who needs a high-quality soldering iron." - John Smith
• Negative review: "I was disappointed with this soldering iron. It took a long time to heat up, and the temperature control was not very precise. I ended up returning it and getting a different model." - Jane Doe

Overall, the Weller 6966EK is a great soldering iron for anyone who needs a powerful and precise tool for electronics work. It is well-made and comes with a variety of accessories, making it a great value for the price. However, it may not be the best choice for those who need a portable soldering iron or who are on a budget.

Here are my thoughts on the Weller 6966EK:

I think the Weller 6966EK is a great soldering iron for the price. It is powerful, precise, and well-made. I would recommend it to anyone who needs a soldering iron for electronics work. However, if you are looking for a portable soldering iron or are on a budget, there may be better options available.

Weller 6966EK Where To Buy

You can buy the Weller 6966EK soldering station and spare parts from the following retailers:

• Weller directly sells the soldering station on their website for $129.99. They also sell a variety of spare parts, including tips, knives, and cleaning brushes.
• Walmart sells the soldering station for $129.99. They also sell a few spare parts, but not as many as Weller directly.
• Amazon sells the soldering station for $129.99. They also sell a wider variety of spare parts than Walmart.
• Best Buy sells the soldering station for $139.99. They also sell a few spare parts, but not as many as Amazon.
• Lowes sells the soldering station for $139.99. They also sell a few spare parts, but not as many as Amazon or Best Buy.
• eBay is a good place to find the soldering station and spare parts if you're looking for a good deal. However, it's important to be careful when buying from eBay, as there are many counterfeit products being sold.

I hope this helps!

Weller 6966EK Problems and Solutions

some common issues and problems with the Weller 6966EK soldering iron and their solutions:

• The iron won't heat up. This is usually caused by a faulty power cord or heating element. To check the power cord, plug the iron into another outlet and see if it heats up. If it does, then the power cord is probably fine and the problem is with the heating element. To check the heating element, you can use a multimeter to measure the resistance. If the resistance is zero or very low, then the heating element is faulty and needs to be replaced.
• The iron doesn't heat up evenly. This is usually caused by a dirty tip. To clean the tip, you can use a brass wire brush or a sponge with isopropyl alcohol. Be sure to dry the tip completely before using it again.
• The iron makes a loud noise. This is usually caused by a dirty fan. To clean the fan, you can use a can of compressed air. Be sure to hold the can upright so that the air comes out in a stream.
• The iron leaks solder. This is usually caused by a faulty solder well. To fix the solder well, you can use a needle to clean out the debris. Be sure to apply flux to the well before adding solder.

Here are some additional tips for troubleshooting and repairing the Weller 6966EK soldering iron:

• Always unplug the iron before attempting to clean or repair it.
• Use only genuine Weller replacement parts.
• If you are not comfortable repairing the iron yourself, take it to a qualified technician.

I hope this helps!

Weller 6966EK Manual

Weller 6966EK Hot Air Gun

Safety Information

• Read all safety instructions before using the hot air gun.
• Keep the hot air gun out of the reach of children.
• Do not use the hot air gun in an explosive atmosphere.
• Do not use the hot air gun near flammable materials.
• Do not use the hot air gun in a wet or damp environment.
• Do not use the hot air gun if it is damaged.
• Always wear safety glasses when using the hot air gun.
• Be careful not to touch the hot air nozzle.
• Do not point the hot air nozzle at yourself or others.
• Do not use the hot air gun to melt plastic or other materials that can produce harmful fumes.
• Turn off the hot air gun when you are not using it.

Before Use

• Make sure that the hot air gun is unplugged before you begin using it.
• Attach the desired nozzle to the hot air gun.
• Turn on the hot air gun and allow it to heat up for a few minutes.
• Adjust the temperature and airflow controls to the desired settings.
• Once the hot air gun is heated up, you can begin using it.

Troubleshooting

• If the hot air gun does not heat up, check the power cord and make sure that it is plugged in properly.
• If the hot air gun is not blowing air, check the air filter and make sure that it is clean.
• If the hot air gun is blowing hot air but not reaching the desired temperature, adjust the temperature control.
• If the hot air gun is making strange noises, turn it off and unplug it immediately.

Maintenance

• Keep the hot air gun clean by wiping it down with a damp cloth after each use.
• Clean the air filter regularly to prevent dust and debris from blocking the airflow.
• Inspect the hot air gun for any damage before each use.
• If the hot air gun is damaged, do not use it.

Warranty

This hot air gun is warranted to be free from defects in materials and workmanship for a period of one year from the date of purchase. If the hot air gun becomes defective during the warranty period, Weller will repair or replace it, at Weller's option, free of charge.

Contact Information

Weller Tools 1350 S. 10th St. Fond du Lac, WI 54935 Phone: (920) 922-3121 Email: [email protected] Website: www.weller-tools.com

Additional Information

• The Weller 6966EK hot air gun is a versatile tool that can be used for a variety of applications, including heat shrinking, drying, and desoldering.
• The hot air gun has a maximum temperature of 430 degrees Celsius and a maximum airflow of 120 liters per minute.
• The hot air gun comes with two nozzles: a 0.2-inch nozzle for precision work and a 1.5-inch nozzle for larger areas.
• The hot air gun is backed by a one-year warranty.